Ultra Air Blaster Mini

The ULTRA Air Blaster Mini matches the power and efficiency of the larger ULTRA Air Blaster while occupying less space. It generates a strong vortex of air to remove dirt, sand, and debris from carpets, upholstery, plastics, and buffing pads. Constructed with durable materials, it is built to last. Its design allows for easy disassembly and reassembly without damage. Featuring a trigger mechanism, removable trumpet, and bearing set, it simplifies maintenance and cleaning.

Pro Tip: For optimal performance, pair it with an air compressor of 20 gallons or more to ensure steady airflow.

Air Blaster V2 & Mini Maintenance Plan

Ensure long-lasting performance and avoid preventable issues like bearing seizure and moisture damage by following the routine maintenance steps below.

Monthly Maintenance Checklist

• Lubricate Mechanical Parts:
  Apply a few drops of WD-40 or similar lubricant into the bearing assembly. Use waterproof grease on the trigger mechanism. Pulse with air and pull the trigger several times to work the grease in.
• Use an Inline Moisture Filter:
  Always connect the tool to a filtered air source. Desiccant or coalescing filters are best.
• Purge the Air Compressor Tank:
  Use the valve at the bottom to release built-up moisture. Leave open until the next use.
• Inspect Nozzle and Air Path:
  Ensure no debris or buildup is blocking airflow.
• Check PSI and SCFM:
  Tool functions best between 90–100 PSI and at least 4.0 SCFM.
• Clean the Exterior:
  Wipe down regularly to prevent grime buildup.

After Each Use:

• Purge Residual Moisture:
  Run the tool for a few seconds to clear internal condensation.
• Purge the Air Compressor Tank:
  Open the valve at the bottom of your air compressor tank and leave it open until the next use. This prevents moisture buildup inside the tank.
• Proper Storage:
  Store the tool with the nozzle facing downward so moisture drains away from internal parts.
• Disconnect Air Supply:
  Detach hose to prevent pressure damage or accidental activation.

Replacement Parts V2 Only & Mini

The V2 model includes serviceable components. If bearings begin to wear (e.g., the tool stops spinning or emits a grinding sound), replace them using the official bearing kit. This extends the tool's life and avoids full unit replacement.